home
products Applications News and Media Dealers Support About Us

line
LBC - Specifications
line

LBC - Without Crawler Skid
Depth Rating
150 Meters Seawater (MSW) - 500 Feet Seawater (FSW)
Length
517 mm - 20.35 in
Width
500 mm - 19.7 in
Height
263 mm - 10.35 in
Diagonal
565 mm - 22.2 in
Weight in Air
13 kg - 28.7 lbs
Protection
Polyethylene bumper frame
LBC - With Crawler Skid
Depth Rating
50 Meters Seawater (MSW) - 165 Feet Seawater (FSW)
Length
517 mm - 20.35 in
Width
500 mm - 19.7 in
Height
395 mm - 15.6 in
Diagonal
637 mm - 25 in
Weight in Air
25 kg - 55 lbs

Thrusters
Thruster configuration
Five (5) Brush-Less DC thrusters - Two (2) forward, two (2) vertical and one (1) lateral. Each thruster is identical, isolated and oil-compensated.
Bollard Thrust (forward)
7 kgf - 15.4 ft/lbs
Bollard Thrust (vertical)
7 kgf - 15.4 ft/lbs
Bollard Thrust (lateral)
3.2 kgf - 7 ft/lbs
Speed at surface
3 knots - 3.45 mph - 1.54 m/s
without crawler skid
Max Operating Current
2 knots in ROV Mode
4 knots in Crawler Mode (attached)

Crawler Skid
Configuration
Front and rear drive mechanism with four (4) 150 mm - 6 in knobby tires, VRAM attractor, flotation and polyethylene frame
Motor/Gearbox
Brushed DC motor and gearbox
Speed over surface
30 m/min (100ft/min)
Control
Forward, reverse, rotate (side to side control like tank)
Ground clearance
25 mm - 1 in

Attractor
Attraction
Max 23 kgf (50ft/lbs)
Control
On/off and variable (10-100%)
Distance to surface
25 mm - 1 in ideal

Cameras & Lighting
Camera Tilt
180 degrees - internal chassis rotates
Range of View
270 degrees per camera - 180 degrees from tilt, 90 degrees from camera lens
Camera - Primary
570 line Ex-View HAD color - 0.2 Lux
Camera - Secondary
430 line B/W - 0.03 Lux
Focus
Manual focus control via hand controller. 90mm to infinity
Video Format
NTSC or PAL
Output Signal
Composite
Transmission Type
Copper
Internal Lighting
High intensity LED array tracking primary camera. Variable intensity via hand controller.

Control System - Power Supply
Configuration
Hand controller, monitor and surface power supply built into protective case
Data Channels
1 RS-232 for LBC controls
Monitor
Color LCD behind weatherproof panel
Sensors
Heading, depth, temperature
Auto Functions
Depth, heading, trim

Hand Controller
 
Length
195 mm - 7.68 in
Width
135 mm - 5.3 in
Height
140 mm - 5.5 in
Weight
625 grams - 1.38 lbs
Joystick
Single - forward, reverse, rotate left, rotate right, roll left, roll right
Joystick Steps
32
Vertical Thruster
Proportional control knob
Additional Controls
Membrane keypad - thruster gain control, trim, auto depth, auto heading, camera tilt, camera focus, camera switch, light On/Off, light intensity, accessories, video overlay position, power On/Off, programming keypad
Safety
I.P. 64 - splash proof

Integrated Control Console
Length
470 mm - 18.5 in
Width
371 mm - 14.6 in
Height
196 mm - 7.7 in
Weight
13 kg - 28.7 lbs
Input Voltage
100-130 VAC or 200-240 VAC
Power Requirement
1,000 Watts maximum
Safety
Isolated input power, circuit breaker, line insulation monitor, leak detector. Meets and exceeds "Code of Practice for the Safe Use of Electricity in Water"
Water Proofing
I.P. 67 - Water proof (closed) - I.P. 64 - Splash proof (open)

Umbilical
Diameter
7.6 mm - 0.3 in nominal
Length
150 meters - 500 feet
Working Strength
45 kgf - 100 lbs
Breaking Strength
318 kgf - 700 lbs
Strength Member
Kevlar
Buoyancy
Neutral in fresh water - slightly positive in Seawater
Conductors
Twisted pair with shield

On-Screen Information Display
Information Displayed
Odometer, VRAM & thruster gain settings, light level, Trim On/Off, heading, depth, turns counter, camera angle, water temperature, time, date, user text
User Text
Up to 28 characters
Positioning
Bottom, top or off
Menus
Quick menu, setup, calibrate, diagnostics, options

Spares, Tools and Manuals
Spares Contents
Fastener kit, seal kit, propellers, gel lube, Kluber grease, acrylic polish, fuse
Tool Contents
1.5, 2, 3, 4, 5 mm hex ball drivers, #1, #2 Phillips screw drivers, 10 mm socket driver, small straight blade screwdriver, 11/16 socket, 19 mm open end, O-ring insertion tool, vacuum pump
Spare Thruster
High output Brush-Less DC thruster assembly
Manuals
Operators manual, service and repair CD-ROM

 


Printable Version

More Information


Downloads


Skid Attachment

Attaching the Crawler skid is simple and takes only a few minutes.

LBC Animation



ROV or Crawler Mode
Operate the LBC in ROV mode for free flying inspections or switch to crawler mode and attach to virtually any hard surface to conduct a 2D inspection.


Stability Control

auto keysFitted to each LBC as standard are Auto Depth and Auto Heading. Using data collected from the high resolution sensors the LBC can be set to maintain an accurate depth as well as an accurate heading. Simple keys on the intuitive hand controller enable the operator to turn the auto functions on and off.



Cruise Control

trim keyThe Trim feature allows the operator to manually lock on the thrusters. For example - fighting a current the forward thrusters can be locked on to the necessary amount to overcome the current.



Fine Tuning

gain keyWith the added power of LBC thrusters there is a need for variable power settings. Equipped with each LBC are separate thruster gain controls. The horizontal thrusters can be set from 10% to 100% available power while the vertical thrusters can be set to values that are again between 10% to 100%. Simply press the appropriate key and a value on the keypad.



Programmable Software

LBC systems incorporate sophisticated software making the system easier to operate as well as perform several functions increasing the performance and safety. There are a variety of user programmable functions to allow each operator to customize their LBC.

As new software is developed it can easily be downloaded and installed using a basic PC compatible computer.


Multimedia

Video Clips
View different short video clips illustrating how LBC operates as both ROV and Crawler.

Photo Gallery
View a variety of images of the LBC.



Applications

Just a few examples of how the LBC systems can be used.

  • Ship Hull Inspections
  • Pipeline Inspections (internal and external)
  • Hydro Dam Inspections
  • Potable water Inspections
  • More to come...


Options, Options, Options
  • Zoom camera
  • Sonar
  • Laser scaling
  • More to come



Home > Products > LBC > Specifications
Copyright © 2007 SeaBotix, Inc. All rights reserved. Legal Notice
FREE counter and Web statistics from sitetracker.com