LBV150S2 - Specifications LBV Depth Rating 150 Meters Seawater (MSW) - 500 Feet Seawater (FSW) Length 530 mm - 21 in Width 245 mm - 9.65 in Height 254 mm - 10 in Diagonal 353 mm - 13.9 in Weight in Air 12 kg - 26.5 lbs Protection Protective shell and polyethylene bumper frame Thrusters Thruster configuration Four (4) Brushless DC thrusters - Two (2) forward, one (1) vertical and one (1) lateral. Each thruster is identical and isolated Bollard Thrust (forward) 7 kgf - 15.4 ft/lbs Bollard Thrust (vertical) 3 kgf - 6.6 ft/lbs Bollard Thrust (lateral) 3 kgf - 6.6 ft/lbs Speed at surface 3 knots - 3.45 mph - 1.54 m/s Max Operating Current 2 knots Cameras & Lighting Camera Tilt 180 degrees - internal chassis rotates Range of View 270 degrees - 180 degrees from tilt, 90 degrees from camera lens Camera - Primary 570 line Ex-View HAD color - 0.2 Lux Camera - Secondary 430 line B/W - 0.03 Lux Focus Manual focus control via hand controller. 90mm to infinity Video Format NTSC or PAL Output Signal Composite Transmission Type Copper Internal Lighting 50 Watt Quartz Halogen. Variable intensity via hand controller. Control System Configuration Hand controller, monitor and surface power supply built into protective case Data Channels 1 RS-232 for LBV controls Monitor 38 cm - 15 in color LCD Sensors Heading, depth, temperature Auto Functions Depth, heading, trim Hand Controller Length 210 mm - 8.3 in Width 160 mm - 6.3 in Height 75 mm - 3 in Weight 650 grams - 1.4 lbs Joystick Single - forward, reverse, rotate left, rotate right, roll left, roll right Joystick Steps 32 Vertical Thruster Proportional control knob Additional Controls Membrane keypad - thruster gain control, trim, auto depth, auto heading, camera tilt, camera focus, camera switch, light On/Off, light intensity, accessories, video overlay position, power On/Off, programming keypad Safety I.P. 64 - splash proof Integrated Control Console Length 452 mm - 17.8 in Width 328 mm - 12.9 in Height 173 mm - 6.8 in Weight 16 kg - 35.3 lbs Input Voltage 100-130 VAC or 200-240 VAC Power Requirement 1,000 Watts maximum Safety Isolated input power, circuit breaker, line insulation monitor, leak detector. Meets and exceeds "Code of Practice for the Safe Use of Electricity in Water" Water Proofing I.P. 64 - Splash proof Umbilical Diameter 8 mm - 0.3 in nominal Length 150 meters - 500 feet Working Strength 45 kgf - 100 lbs Breaking Strength 318 kgf - 700 lbs Strength Member Kevlar Buoyancy Neutral in fresh water - slightly positive in Seawater Conductors Twisted pair with shield On-Screen Information Display Information Displayed Thruster gain settings, light level, Trim On/Off, heading, depth, turns counter, camera angle, water temperature, time, date, user text User Text Up to 28 characters Positioning Bottom, top or off Menus Quick menu, setup, calibrate, diagnostics, options Transit Cases Case - 1 Length 762 mm - 30 in Width 516 mm - 20.3 in Height 452 mm - 17.8 in Weight 28.5 kg - 62.5 lbs Contents LBV with options if fitted and spares kit Case - 2 Length 762 mm - 30 in Width 516 mm - 20.3 in Height 452 mm - 17.8 in Weight 30kg - 66 lbs Contents Umbilical, integrated console, spare thruster, manuals and vacuum pump. Spares, Tools and Manuals Spares Contents Fastener kit, seal kit, propellers, spare Halogen lamp, gel lube, Kluber grease, acrylic polish, fuse Tool Contents 1.5, 2, 3, 4, 5 mm hex ball drivers, #1, #2 Phillips screw drivers, 10 mm socket driver, small straight blade screwdriver, 11/16 socket, 19 mm open end, O-ring insertion tool, vacuum pump Spare Thruster Brushed DC thruster assembly Manuals Operators manual, service and repair CD-ROM