 |
LBV150SE-5 - Specifications |
|
| Depth Rating |
150 Meters Seawater (MSW) - 500 Feet Seawater (FSW) |
| Length |
517 mm - 20.35 in |
| Width |
500 mm - 19.7 in |
| Height |
263 mm - 10.35 in |
| Diagonal |
565 mm - 22.2 in |
| Weight in Air |
13 kg - 28.7 lbs |
| Protection |
Polyethylene bumper frame |
Thrusters
|
| Thruster configuration |
Five (5) Brushless DC thrusters - Two (2) forward, two (2) vertical and one (1) lateral. Each thruster is identical, isolated and oil-compensated. |
| Bollard Thrust (forward) |
7 kgf - 15.4 ft/lbs |
| Bollard Thrust (vertical) |
8 kgf - 17.6 ft/lbs |
| Bollard Thrust (lateral) |
3.2 kgf - 7 ft/lbs |
| Speed at surface |
3 knots - 3.45 mph - 1.54 m/s |
| Max Operating Current |
2 knots |
Cameras & Lighting
|
| Camera Tilt |
180 degrees - internal chassis rotates |
| Range of View |
270 degrees per camera - 180 degrees from tilt, 90 degrees from camera lens |
| Camera - Primary |
570 line Ex-View HAD color - 0.2 Lux |
| Camera - Secondary |
430 line B/W - 0.03 Lux |
| Focus |
Manual focus control via hand controller. 90mm to infinity |
| Video Format |
NTSC or PAL |
| Output Signal |
Composite |
| Transmission Type |
Fiber Optic |
| Internal Lighting |
High intensity LED array tracking primary camera. Variable intensity via hand controller. |
Control System - Power Supply
|
| Configuration |
Hand controller, monitor and surface power supply built into protective case |
| Data Channels |
1 RS-232 for LBV controls and 1 RS232 spare channel |
| Monitor |
Color LCD behind weatherproof panel |
| Sensors |
Heading, depth, temperature |
| Auto Functions |
Depth, heading, trim |
|
Hand Controller |
|
| Length |
210 mm - 8.3 in |
| Width |
160 mm - 6.3 in |
| Height |
75 mm - 3 in |
| Weight |
650 grams - 1.4 lbs |
| Joystick |
Single - forward, reverse, rotate left, rotate right, roll left, roll right |
| Joystick Steps |
32 |
| Vertical Thruster |
Proportional control knob |
| Additional Controls |
Membrane keypad - thruster gain control, trim, auto depth, auto heading, camera tilt, camera focus, camera switch, light On/Off, light intensity, accessories, video overlay position, power On/Off, programming keypad |
| Safety |
I.P. 64 - splash proof |
|
Integrated Control Console
|
| Length |
452 mm - 17.8 in |
| Width |
328 mm - 12.9 in |
| Height |
173 mm - 6.8 in |
| Weight |
16 kg - 35.3 lbs |
| Input Voltage |
100-130 VAC or 200-240 VAC |
| Power Requirement |
1,000 Watts maximum |
| Safety |
Isolated input power, circuit breaker, line insulation monitor, leak detector. Meets and exceeds "Code of Practice for the Safe Use of Electricity in Water" |
| Water Proofing |
I.P. 64 - Splash proof |
Umbilical
|
| Diameter |
8 mm - 0.3 in nominal |
| Length |
175 meters - 574 feet |
| Working Strength |
45 kgf - 100 lbs |
| Breaking Strength |
318 kgf - 700 lbs |
| Strength Member |
Kevlar |
| Buoyancy |
Neutral in fresh water - slightly positive in Seawater |
| Conductors |
Twisted pair with shield and fiber |
On-Screen Information Display
|
| Information Displayed |
Thruster gain settings, light level, Trim On/Off, heading, depth, turns counter, camera angle, water temperature, time, date, user text |
| User Text |
Up to 28 characters |
| Positioning |
Bottom, top or off |
| Menus |
Quick menu, setup, calibrate, diagnostics, options |
|
Spares, Tools and Manuals
|
| Spares Contents |
Fastener kit, seal kit, propellers, gel lube, Kluber grease, acrylic polish, fuse |
| Tool Contents |
1.5, 2, 3, 4, 5 mm hex ball drivers, #1, #2 Phillips screw drivers, 10 mm socket driver, small straight blade screwdriver, 11/16 socket, 19 mm open end, O-ring insertion tool, vacuum pump |
| Spare Thruster |
High output Brushless DC thruster assembly |
| Manuals |
Operators manual, service and repair CD-ROM |
|
Printable Version
| Stability Control |
 Fitted to each LBV150SE-5 as standard are Auto Depth and Auto Heading. Using data collected from the high resolution sensors the LBV150SE-5 can be set to maintain an accurate depth as well as an accurate heading. Simple keys on the intuitive hand controller enable the operator to turn the auto functions on and off.
|
| Cruise Control |
 The Trim feature allows the operator to manually lock on the thrusters. For example - fighting a current the forward thrusters can be locked on to the necessary amount to overcome the current.
|
| Fine Tuning |
 With the added power of LBV150SE-5 thrusters there is a need for variable power settings. Equipped with each LBV150SE-5 are separate thruster gain controls. The horizontal thrusters can be set from 10% to 100% available power while the vertical thrusters can be set to values that are again between 10% to 100%. Simply press the appropriate key and a value on the keypad.
|
| Multimedia |
Video Clips
View different short video clips illustrating how the LBV150SE-5 operates.
Photo Gallery
View a variety of images of the LBV150SE-5.
|
| Applications |
Just a few examples of how the LBV150SE-5 systems can be used.
- Ship Hull Inspections
- Maritime Security
- Inshore/Offshore
- Search and Rescue
- Pipeline Inspections (internal and external)
- Hydro Dam Inspections
- Potable water Inspections
- More to come...
|
| Options, Options, Options |
|
|
