LBV600XL2 - Specifications LBV Depth Rating 600 Meters Seawater (MSW) - 2,000 Feet Seawater (FSW) Length 530 mm - 21 in Width 484 mm - 19.1 in Height 270 mm - 10.6 in Diagonal 554 mm - 21.8 in Weight in Air 15.3 kg - 33.8 lbs Protection Polyethylene bumper frame Thrusters Thruster configuration Six (6) Brushless DC thrusters - Four (4) forward, one (1) vertical and one (1) lateral. Each thruster is identical and isolated Bollard Thrust (forward) 12.7 kgf - 28 ft/lbs Bollard Thrust (vertical) 3 kgf - 6.6 ft/lbs Bollard Thrust (lateral) 3 kgf - 6.6 ft/lbs Speed at surface 4 knots - 4.6 mph - 2.06 m/s Max Operating Current 2.5 knots Cameras & Lighting Camera Tilt 180 degrees - internal chassis rotates Range of View 270 degrees - 180 degrees from tilt, 90 degrees from camera lens Camera - Primary 570 line Ex-View HAD color - 0.2 Lux Camera - Secondary 430 line B/W - 0.03 Lux Focus Manual focus control via hand controller. 90mm to infinity Video Format NTSC or PAL Output Signal Composite Transmission Type Fiber Optic Internal Lighting High intensity LED array tracking camera. Variable intensity via hand controller. Control System Configuration Hand controller and monitor built into protective case with separate surface power supply Data Channels 1 RS-232 for LBV controls and one spare 115K Monitor 38 cm - 15 in color LCD behind waterproof panel Sunshade Crush texture cover for LCD monitor Sensors Heading, depth, temperature Auto Functions Depth, heading, trim Hand Controller   Length 210 mm - 8.3 in Width 160 mm - 6.3 in Height 75 mm - 3 in Weight 650 grams - 1.4 lbs Joystick Single - forward, reverse, rotate left, rotate right, roll left, roll right Joystick Steps 32 Vertical Thruster Proportional control knob Additional Controls Membrane keypad - thruster gain control, trim, auto depth, auto heading, camera tilt, camera focus, camera switch, light On/Off, light intensity, accessories, video overlay position, power On/Off, programming keypad Safety I.P. 64 - splash proof Integrated Control Console Length 452 mm - 17.8 in Width 328 mm - 12.9 in Height 173 mm - 6.8 in Weight 13 kg - 28.7 lbs Water Proofing I.P. 64 - Splash proof Surface Power Supply Length 508 mm - 20 in Width 289 mm - 11.4 in Height 311 mm - 12.3 in Weight 18.8 kg - 41.6 lbs Input Voltage 100-240 VAC Power Requirement 3,000 Watts maximum Safety Isolated input power, circuit breaker, line insulation monitor, leak detector. Meets and exceeds "Code of Practice for the Safe Use of Electricity in Water" Water Proofing I.P. 64 - Splash proof Umbilical Diameter 8.4 mm - 0.33 in nominal Length 750 meters - 2,460 feet Working Strength 45 kgf - 100 lbs Breaking Strength 318 kgf - 700 lbs Strength Member Kevlar Buoyancy Neutral in fresh water - slightly positive in Seawater Conductors Twisted pair with shield and a multi-mode fiber Lightweight Launch and Recovery System Length Width Height Weight Construction On-Screen Information Display Information Displayed Thruster gain settings, light level, Trim On/Off, heading, depth, turns counter, camera angle, water temperature, time, date, user text User Text Up to 28 characters Positioning Bottom, top or off Menus Quick menu, setup, calibrate, diagnostics, options Transit Cases Case - 1 Length 762 mm - 30 in Width 516 mm - 20.3 in Height 452 mm - 17.8 in Weight 27 kg - 60 lbs Contents LBV with options if fitted and spares kit Spares, Tools and Manuals Spares Contents Fastener kit, seal kit, propellers, gel lube, Kluber grease, acrylic polish, fuse Tool Contents 1.5, 2, 3, 4, 5 mm hex ball drivers, #1, #2 Phillips screw drivers, 10 mm socket driver, small straight blade screwdriver, 11/16 socket, 19 mm open end, O-ring insertion tool, vacuum pump Spare Thruster Standard thruster assembly Manuals Operators manual, service and repair CD-ROM