Sonar displays ‘Timeout’ when LBV is energized, or Sonar Sweep moves in steps/is irregular. This occurs with first-time use, or new computers.
Failure #1	No/Poor communications between SPS/ICC and computer.
Cause #1	Port settings on computer are incorrect.
Fault Isolation #1	Please verify the following for the computer port to which the Sonar is connected:  115,200 baud, 8 data bits, 0 parity bits, 1 stop bit. Advanced port settings: FIFO buffers on, adjust transmit and receive buffers until optimum sweep is achieved. If problem persists reduce baud rate to 57,600.

Related Systems

All systems fitted with sonar.

Need More Help?

Find an authorized service center near you. Or contact the SeaBotix service department directly. Service Contact Details