No Camera image (Blue Screen), but LBV is controllable. Overlay Data is Present.
|
| Failure #1 |
Camera feed is not reaching the Motherboard |
| Cause #1 |
Camera has failed. |
| Fault Isolation #1 |
Select other camera (if equipped). If other camera feed is displayed, either the camera is faulty, or the connectors on either end of the camera-to-Motherboard cable have become disconnected. |
| Cause #2 |
Camera-select circuit on Motherboard has failed. |
| Fault Isolation |
Selecting either camera still shows Blue screen. Motherboard must be returned to factory for repair/replacement. |
|
| Need More Help? |
Find an authorized service center near you.
Or contact the SeaBotix service department directly.
Service Contact Details
|
|
