No Camera image (Black Screen), but LBV is controllable. Overlay Data is present (Usually when Deployed). Lighting Circuit is software-controllable, and light overlay indicator changes as expected.
|
| Failure #1 |
Light Levels too low. |
| Cause #1 |
Lamp Blown. |
| Fault Isolation #1 |
Replace lamp. |
| Cause #2 |
Lamp Circuit has failed. |
| Fault Isolation #2 |
If failure persists after replacing lamp, lighting circuit hardware on Motherboard has failed. Motherboard must be returned to factory for repair or replacement. |
|
| Need More Help? |
Find an authorized service center near you.
Or contact the SeaBotix service department directly.
Service Contact Details
|
|
