When CC power button is pressed, the SPS acts normally, Video image is normal, ‘SeaBotix LBV150(et al.) appears, but Overlay Data is partial and LBV cannot be controlled. ‘SeaBotix, Inc. LBV150’ may or may not remain on screen. CC Auto Head and Depth LEDs may flash alternately(or ,one or the other are continuously lit) and Motherboard Communication LEDs remain unlit.
|
| Failure #1 |
SPS Data (FSK) or Transceiver (OOK) Board is disconnected or faulty. |
| Cause #1 |
Various |
| Fault Isolation #1 |
Verify board is installed and connected properly. If in doubt about connection configuration, contact SeaBotix, Inc. If board is installed properly, board is faulty and must be returned to factory for repair/replacement. |
|
| Need More Help? |
Find an authorized service center near you.
Or contact the SeaBotix service department directly.
Service Contact Details
|
|
